Checked the website, searching for information about these jumpers.
All our boards come with detailed installation instructions.. yeah sure :-(
Found a page with installation instructions in german and english for all of their boards.. all of their display boards that is - but not for boards 10036 and 10037, which are their WPC and WPC-S replacement boards.

So time to read the small print on the board and try some settings.
All dip-switches by default come in the off position. The board won't work like that The game seems to reboot the whole time, of the 3 leds on the top left of the cpu board, the bottom will stay on, and middle will blink 1 time. As on the original cpu board, the top one should go out, bottom stay on, and middle should go on/off all the time.

Dipswitches 1 and 2 are set according to the eprom size. 512/1mb, or 1/2/4mb.
Therefor you set them on/off or off/on.

The other switches have something to do with ram size and battery settings.
Some of their default presets are printed on the pcb.
Anyway I just started testing some combinations and finall got the board to start.
Don't remember exact settings, I'm certain it was set for 1/2/4mb, don't remember if the other settings about battery were all off or some on.

Once the board worked, I had no issues with it. It works identical to the original board. The game played well, all tests, settings and adjustments were done