For sale JJP Dialed In LE, which has been in home use only. I am the only owner for the pin thus far and I received it in December 2017.

I have no bad comments about the machine: it has been working technically just fine and I have not seen anything to note about the
machine cosmetically. If you look at the pictures, it is like new, the machine has had only a low number of plays.

My Dialed In LE has had from start a playfield protector, so the playfield should be very nice as well. (The playfield protector however
accomplishes the ball getting sometimes stuck on two places of the playfield, but I have still preferred to have the playfield protector in.)

Dialed in LE has also Inviglass, shaker and pinball button protectors.   

The pin is located in Helsinki, Finland.

The pin is sold "as is" and the price is 8700 EUR 8500 EUR + shipping cost.
Also the buyer could take a small ferry trip to Helsinki and pick the pin up. Some other delivery options than regular shipping
on pallet may be there as well, but those need to be discussed separately.

In the pictures there are the pinstadium-type light bars installed, they are not a part of the deal.

Possible trade-candidates, but the condition should be on the same level as the condition of my DI LE is:
Batman66 Premium or LE, Monster Bash Remake LE.

Contacts via private message, please.

I am willing to sell my GOT LE with a brand new playfield, a shaker and the Stern topper (dragon/castle).

Number of games played on the new playfield: 1

I played one game just to check out that the playfield works with the cabinet.
With my one game I noticed that the elevator to the upper playfield will need some adjusting (the game had to try 2-3 times before getting the ball up to the upper playfield), but I will leave that to the new owner.

I did not notice any insert ghosting either on the new playfield. Cabinet is also like new.

The game is sold "as is" and the shipping will be at the buyer's risk.

I am willing to sell it for 9000 EUR + shipping costs.

GOT LE is located in Helsinki, Finland, so shipping will be required (I can put it onto a pallet) or perhaps you could take a ferry-trip with car to Helsinki to check the pin out and then take it back to Sweden?

Pics:

I am selling my very very nice Monster Bash.

MB has:
- custom green armor (siderails, lockdown bar, coin door, hinges, legs)
- original playfield, was restaured about a year ago (also the underside of the playfield)
- rubbers are titan pinball competition "glow in the dark" -model
(but to me they don't glow that much...)
- cabinet has new decals
- illuminated flipper buttons + cabinet protectors + Stern-style metal cabinet protectors for legs
- green undercab lightning
- really nice sideblades inside the cabinet
- vampire topper
- custom-painted monsters on the playfield
- pinball bulbsin "ultimate led kit" installed
https://www.pinballbulbs.com/products/monster-bash-pinball-ultimate-led-lighting-kit
- the backboard is apparently some newer illuminated plexiglass model

Some negatives that come to my mind:
- Frank is missing one finger and even though his eyes are ledded, only other eye is
currently working - I presume it is an easy fix - you have to go inside frank and
resolder the led
(In the pics I have on pinballowners.com both eyes were working)
- the playfield has a couple of small spots that were not restaured - in the midst of
pop bumbers and not visible to the player

Because it is a 20-year old game, despite how well it was restaured, I am only selling
it "as is". It would be good if one could come over and have a few games on it and see how
it feels.

New pictures attached (pics of the cabinet sides are old, but they are as they look in the pics).
Backbox sides are also fine, even though I notice that  I did not take a picture of them a minute ago.
Further pics can be found here: www.pinballowners.com/markv.
If there is a need, I can take further pics and e.g. game play video etc.
In the pics at Pinballowners, there is a mantis monster scoop hole protector, but I
exchanged it later to a cliffy(?) protector, as I think it gives more protection.
The scoop hole was fine when I exchanged the protectors, so it should be fine still.

When picked up, price is 7650 EUR with a pin2dmd-display (in pictures) and 7500 EUR
with regular old DMD, which is a bit loud. In case of shipping, the shipping costs will
be added.

I might also be interested in a trade to very nice WOZ, Batman66 Premium or a CC.

Pics:

If you have an extra Pinbits' Merlin Hole protector and/or shaker available for a MM,
do let me know via PM.

Here are links to above-mentioned items:
https://www.pinbits.com/index.php?main_page=product_info&cPath=13_1&products_id=186
https://www.pinbits.com/index.php?main_page=product_info&cPath=13_1&products_id=445

Thanks!

I have a very nice original MM that I would be interested in trading to your nice ECLEWOZ, WOZ 75th, GB Premium/LE (without ghosting) or CC(C).
Let me know what you have and let's work out +/- cash issues when a possible trade candidate is found.

My pin is located in Helsinki, Finland, so shipping would be required. I might also be able to drive my pin to Sweden - it is
always nice to make a pinball road-trip.

The playfield and cabinet in my MM are very very good, even though they are not perfect.

My MM has:
+ a shaker
+ Pin2DMD display
+ playfield protector
+ custom black (with sparkles) painted armor (legs, siderails, coin door, lockdown bar, hinges)
+ Pinball Bulbs' Ultimate LED kit installed
+ cool castle topper
+ ledded troll eyes
+ illuminated backboard
+ upgraded dragon
+ anti-glare display shield on the DMD
+ keyless lock-system in place
+ cliffy and mantis protectors installed

Pics here:

Looking to trade my very nice MM to your similar or better
CC/CCC. Depending on condition and add-ons installed, cash
could go either way.

My MM has:

- Mantis and some Cliffy protectors
- Pinball Bulbs' Ultimate led kit
- Playfield Protector
- Pinbits' shaker
- Illuminated backboard with lightning
- Ledded troll eyes
- Flipperbutton protectors
- Castle topper
- Custom armor (black with sparkles) - siderails, lockdown bar, hinges, legs
- Cabinet protectors
- Original very nice playfield
- Pin2DMD-display
- Probably some other stuff I cannot remember off-hand

Pics:










Please let me know what you have. Will send more pics per request, let me know what you need.
My pin is located in Helsinki, Finland, so shipping most probably is required.

It is also possible to trade my SM + cash to your CC/CCC. Have a look here
for my SM's pictures and description:
http://www.svenskaflippersallskapet.com/index.php?topic=23064.0

My SM, positives:

- has the Back Ally Creations' Buildings and Metro mod in it with Pinball Refinery's lightning
- has Pinball Bulbs' Ultimate Led Kit installed
- has custom painted blue armor (including coin door and the apron), tiny scratch on the siderail though
- has red undercab lightning
- has a Stern shaker
- has a cool topper
- has the inner sideboard decals (cityscape)
- has a custom shooter rod
- has new red web plastics
- has target armor
- has speaker decal installed
- has cliffys around the doc ock magnet, also has shooter lane protectors
- has Pinballlife's ultra gloss pinballs
- has anti-glare shield on the DMD-display
- has cabinet leg protectors
- rubbers have been changed recently
- mechanically working just fine

negatives:

- there are two tiny holes near upper flipper (somebody used too long screws), they have been secured since and do not affect gameplay
- one completely broken plastic (missing half of the plastic)
- some wear at the cabinet

My pin is located in Helsinki Finland, but transport to/from Sweden should be no problem.

Pics: